top of page
LS Production, F-Body, 3-Stage, Component Package

LS Production, F-Body, 3-Stage, Component Package

This package includes the most popular and highly recommended components needed to properly install a Dailey Engineering LS production dry sump on your race car. Using Dailey Engineering's "Signature Series" billet aluminum oil pan and 3-stage "SP Series" oil pump, this system was designed to fit within the space constraints of a production car motor mount without compromising performance.    
 
Optional Pressure Gear Sizes: See technical page for more info. 
Increased 20%: 1.450"
Standard OEM: 1.250"
 
This system is designed for the GM Camaro F-Body damper configuration and LS2/LS3 wet sump front timing cover. To install this system on an LS7 style OEM "Dry Sump" engine the front timing cover and timing chain will need to be converted to the wet sump configuration. For more information please see our Technical page.    
 
NOTE:
The components in this package are not vehicle specific and their mounting placement in the car is the responsibility of the chassis and/or engine builder. Some custom fabrication may be required.    
 
The A/C compressor will need to relocated or removed for this system to be installed. 

  • This kit includes the following items

    • Qty 1 - Dry Sump Oil Pump: (04-99-2667) OR (04-99-2667-2) - Dailey Engineering SP Series 3-Stage oil pump. The difference between these pumps is the location of the pressure inlet fitting. 
    • Qty 1 - Dry Sump Oil Pan: (20-02-0666-ASSY) - Dailey Engineering billet T6 6061 dry sump oil pan, LS right side 
    • Qty 1 - Oil Pump Pulley: Dailey Engineering HTD oil pump pulley
    • Qty 2 - Drive Belt: HTD oil pump drive belts
    • Qty 1 - Damper: (ATI918855) - ATI Damper, Camaro F-Body 10% underdriven O.D. with 25 Tooth HTD oil pump drive pulley OR (ATI918852) - ATI Damper, Camaro F-Body OEM O.D. with 25 Tooth HTD oil pump drive pulley
    • Qty 1 - Oil Feed Fitting: (26-02-0600) - Dailey Engineering LS oil feed fitting for OEM engine block, 16mm thread to -10 flare
    • Qty 1 - Oil Tank: 
    1. ARA1- (FR6D-1225) 2.5 Gallon, Split Return, 6" diameter by 24" tall
    2. ARA1-(FR6D-1220) 2.0 Gallon, Split Return, 6" diameter by 20" tall
    3.  ARA1- (S72P-SPR) 2.3 Gallon, Split Return, 7" diameter by 16" tall
    4. ARA1- (S72P-STR) 2.3 Gallon, Stacked Right Return, 7" diameter by 16" tall
    • Qty 1 - Oil Tank Mounting Set: ARA1- (FR-6TM) OR (FR-7TM) tank mounting bracket set
    • Qty 1 - Oil Tank Breather: ARA1 (EBR-12WM) 3" diameter by 10.5" Tall or ARA1 (40FT-WM) 4" diameter by 7.5" tall, oil tank breather with mounting bracket
    • Qty 1 - Scavenge Return Filter: (09-0439) - Peterson or (7116AN-713075HP) - XRP scavenge filter, 75 micron, -16A/N
    • Qty 1 - Remote Oil Filter Mount: (24-02-0600-B-10) Bypassing OR (24-02-0600-NB-10) Non-Bypassing - Dailey Engineering remote oil filter housing, -10A/N outlet
    • Qty 1 - Tank Fitting Kit - (TFK1) - Dry Sump Solutions tank fitting kit 

  • Additional Items Needed

    • Vacuum regulator or Breather for the valve cover
    • Plumbing
    • OEM style pan gasket
    • Pan rail hardware

  • Shipping

    • Some or all of these items may be drop shipped from the manufacturer and are subject to their shipping lead times  
$5,490.00Price
bottom of page