Classic Series 5-Stage
Dailey Engineering 5-Stage Classic Dry Sump Oil Pump - This pump is designed for drag race applications with four scavenge pickups on the oil pan, or with three scavenge sections on the oil pan and one scavenge section for the valley. For maximum vacuum capacity dual -16 or a -20 manifold scavenge outlets can be added.
Pump Number Series: 02-99-1212-
Pump part numbers have a final dash number that depends on what options are chosen. The final part number will be emailed to you along with a final pump drawing once the order is in process.
Optional Pressure Gear Sizes: See technical page for more info.
Pressure Gear Width: 1.20", 1.00", 0.80"
Pressure Regulator Spring: See technical page for more info.
The pump is assembled with a Standard spring and both a High and Low will come with the kit
Pressure Inlet Fitting:
Fitting Options: -12, -16
Pressure Outlet Fitting:
Fitting Options: -10, -12
Scavenge Inlet Fittings:
Fitting Options: (4)-12, (3)-12 (1)-10
Scavenge Outlet Fitting:
Fitting Options: (1)-16, (2)-16s, -20 Manifold +$200
Mounting Bracket Options:
Small Block Chevy: Door Car, Dragster
Big Block Chevy: Door Car, Dragster
- 1.200" wide pressure housing
- Four 1.700" Roots style scavenge sections
- Integrated pressure regulator
- 5/8" drive shaft with 3/16" keyway
- Pump speed is 50% engine speed
ADDITIONAL ITEMS NEEDED
- HTD oil pump pulley assembly
- HTD oil pump drive belt
- Crankshaft drive mandrel with HTD drive pulley
- Remote oil filter
- 75 micron scavenge filter (recommended)
- Oil tank
- Dry sump oil pan